Metrohm TiNet 2.5 - Manual (Page 17)

TiNet 2.5 Compliant Program settings • 15
3.1.2 Audit Trail settings
Settings according to 21 CFR Part 11 :
<Apply>
sets all Audit Trail options to default settings accord-
ing to 21 CFR Part 11.
Enable Audit Trail ([on], off)
If this option is enabled, all program actions defined as Audit
Trail actions are registered automatically in the Audit Trail data-
base.
3.1.3 Define default strings
Category: Selection of the category, for which default strings can be de-
fined.
Add new default string. The window for entering default strings
is opened.