Metrohm TiNet 2.5 - Manual (Page 51)

TiNet 2.5 Compliant Titrations • 49
5.4.6 Live titration curves
For every connected titration device, a tab with the name of this device is
displayed in the main window. On these tabs, the live curves of running
determinations will be displayed. The view of this curves can be defined
with
TiNet 2.5 Compliant, Extra, Options, Curve settings (see section 3.4.1).
5.4.7 Emergency stop
<Stop> immediately stops the run. Any calculations and report instruc-
tions after this sop point will not be carried out.
If you wish to stop only one titration, one measurement or any single de-
vice procedure, you can do this with the
<STOP> key on the device itself.