Metrohm TiNet 2.5 - Manual (Page 65)

TiNet 2.5 Compliant Working according to 21 CFR 11 • 63
7.1.4 Addition of user groups and users
1. Using the right mouse key, click into the left field of the User administra-
tion window (see section 3.2) and select the New group menu item.
2. Enter the desired Group name and Description and click on <Accept>
(see section 3.2.1).
3. Expand the new user group branch and click on Access policies (see
section 3.2.2).
4. Disable the desired menu items, which should not be accessed by
this user group, and click on <Accept> .
5. Click on Signatures (see section 3.2.3).
6. Enable or disable the electronic signature policy for methods and re-
sults for this group and click on <Accept> .
7. Using the right mouse key, click on the new user branch and select
the New user menu item.
8. Enter User name , Full name and Remarks for the new user and click on
<Accept> .
9. Repeat this procedure to enter all the desired user groups and users.
10. Click on
<OK> to close the User administration window
7.1.5 Print options
1. Select Extra/Options/Print options to open the Print options window (see
section 3.4.2).
2. In the Print options for TiNet reports box, enable the Special printer op-
tion and select the FinePrint pdfFactory Pro printer driver.
3. In the
Print options for PDF reports
box, select the printer to which PDF
reports will be printed.
4. Select the directory to which PDF reports will be saved.
5. Enable or disable the option for immediate printing of PDF reports
(Adobe Acrobat Reader must be installed).
6. Click on <OK> to close the Print options window.