Metrohm TiNet 2.5 - Manual (Page 66)

64 • Working according to 21 CFR 11 TiNet 2.5 Compliant
7.2 Configuration of devices
1. Select Extra/Configuration to open the TiNet 2.5 Configuration window.
2. Configure all devices connected to the PC (see 8.110.8243 Instruc-
tions for Use "TiNet 2.4/2.5", section 2).
3. Close the TiNet 2.5 Configuration window.
7.3 Methods
7.3.1 Create new draft methods
1. Select
Extra/Methods/New method
to open the
TiNet 2.5 Methods
win-
dow.
2. Create the new draft method (see 8.110.8243 Instructions "TiNet
2.4/2.5", section 2).
3. In order to generate automatically a PDF report, make sure that the
Print immediately option is enabled in the report block. This report gen-
eration only works with one report block per method (others are ig-
nored).
4. Save the new method in the desired directory.
5. Close
the TiNet 2.5 Methods window.
7.3.2 Save methods in the method database
1. Select Extra/Methods/Method administration to open the Method admini-
stration window (see section 4.3.1).
2. Select the Current method directory from which you would copy draft
methods into the method database.
3. Select the desired draft method, which should be saved as database
method.
4. Using the right mouse key, select the Save method in database menu
item. The Comment on method modification window appears.