Metrohm TiNet 2.5 - Manual (Page 64)

62 • Working according to 21 CFR 11 TiNet 2.5 Compliant
7.1.3 Addition of new administrators
1. Select Extra/User administration to open the User administration window
(see section 3.2).
2. Using the right mouse key, click on the selected Administrator group
and select the New user menu item.
3. Enter User name , Full name and Remarks for the new administrator and
click on <Accept> .
4. Repeat this procedure (steps 2 and 3) to enter a second new user
with administrator policies.
5. If desired, repeat this procedure (steps 2 and 3) to enter more users
with administrator policies.
6. Click on <OK> to close the User administration window.
7. Click on
<Logout>
. The
Login
window opens (see section 3.3.1).
8. Enter the user name of one of the new administrator users into the
User name field and the same user name into the Password field. Click
on <OK> .
9. Confirm the message appearing in the Information window with <OK> .
The Change password window appears.
10. Enter the user name into the Old password field and a new password
into the New password field. Confirm this password by reentering it in
the Confirm password field and click on <OK> .
11. Enter the new password in the Login window and click on <OK> .
12. Select
Extra/User administration
to open the
User administration
window.
13. Expand the Administrator branch in the left field of the window and se-
lect the Admin user.
14. Using the right mouse key, click on the selected Admin user and select
the Remove user menu item.
15. Confirm the appearing message with <OK> . The Admin user will be
removed from the Administrator group.