Metrohm 862 Compact Titrosampler - Manual (Page 139)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Parameters
862 Compact Titrosampler ￭￭￭￭￭￭￭￭ 129
Number of buffers
Number of buffers that are used for calibration. If calibration is accom-
plished with more than two buffers, then they can be used repeatedly
give them more statistical weight. The first two buffers must however
always be different from one another.
Selection 1 | 2 | 3 | 4 | 5
Default value 2
Buffer 1 pH
This parameter is visible only when Buffer type = Special.
Range –20.000 ... 20.000
Default value 7.000
Buffer 2 pH
This parameter is visible only when Buffer type = Special.
Range –20.000 ... 20.000
Default value 4.000
Selection off
Buffer 3 pH
This parameter is visible only when Buffer type = Special.
Range –20.000 ... 20.000
Selection off
Default value off
Buffer 4 pH
See Buffer 3 pH.
Buffer 5 pH
See Buffer 3 pH.
7.4.3 Reports
Menu ▶ Parameters ▶ Reports
The reports that will be printed out automatically in connection with a cal-
ibration are defined under Reports.
Results
The result report contains the specifications for the calibration (slope,
pH(0), etc.).
Selection on | off
Default value off