Metrohm 862 Compact Titrosampler - Manual (Page 64)

5.7 Live modifications ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
54 ￭￭￭￭￭￭￭￭ 862 Compact Titrosampler
Note
If the determination is finished while the editing dialog is opened (e.g.
of the sample size), then this will be closed automatically and the result
dialog will be displayed. The value entered must be entered once more
and the determination must be recalculated.
Make sure that the editing dialogs are closed before the determination
is finished.
5.7.2 Editing the sample table while a determination is running
You can insert new lines or delete existing ones or edit sample data while
a determination is running.
Note
We recommend that the editing dialogs always be closed in order to
ensure that no problems occur during the run and that the current data
is always available for calculation purposes.
Editing the sample table
Proceed as follows to edit the sample table:
1 Display the main dialog
￭ Press [BACK].
The main dialog is displayed. The determination continues to run in
the background.
2 Open the main menu
￭ Select Menu and press [OK].
3 Select the sample data
￭ Select the menu item Sample table and press [OK].
￭ Select the desired line.