Metrohm 726 Titroprocessor - Manual (Page 227)

10. Curves and re-evaluation
726 Titroprocessor, Instructions for use 221 221
The <é> or <ê> keys switch the graphics cursor off again.
These functions are also available for overlapping curves.
10.2 Overlapping curves
Several curves of the same type (same methods, same modes, same
presentation size) can be overlapped and compared on the screen.
Make sure that the corresponding determinations are loaded in the working
memory. Use the file manager for this if necessary.
• First select a curve to be displayed with the ([Select file]) softkey.
Set the display parameters so that all curves can be shown ( [*Param]
[Curve display]
) softkeys. If 'auto' is selected for the axis scaling
then all curves will be adapted automatically.
• Press [Add curves] in order to display a selection list of the curves in
the working memory which can be compared with each other. One or
more curves can now be selected.