Metrohm 824 Easy Sample Changer - Manual (Page 17)

2.4 Attaching and equipping a titration head
824 Easy Sample Changer, Installation
11
2.4 Attaching and equipping a titration head
Macro-titration head
6.1458.010
Micro-titration head
6.1458.020
Attachment screws
Electrode
Buret tip
Rod stirrer
2.802.0020
SGJ14 Sleeve
6.1236.020
Screw nipple
4.658.0180
SGJ9 Guiding sleeve
6.2709.070
Propeller stirrer
6.1909.020
Fig. 7 Macro-titration
head
Fig. 8 Micro-titration head
Note about the Macro-titration head
The SGJ14 opening marked by an arrow is bored at a slight angle so that a rod stirrer or an
electrode can be centered in narrow titration vessels.
Only special micro-electrodes
can be used with the micro-
titration head; see list of
accessories, p. 46.