6 connecting devices to the remote socket, 1 remote connections, Connecting devices to the remote socket – Metrohm 824 Easy Sample Changer User Manual
Page 21: Remote connections, Fig. 13, Connecting a 7xx, Titrino
2.6 Connecting devices to the Remote socket
824 Easy Sample Changer,
Installation
15
2.6 Connecting devices to the Remote socket
Connection cable
If the 824 Easy Sample Changer is to be connected to other devices
then only Metrohm cables should be used as these are the only cables
that guarantee perfect data transfer.
Note:
The Remote cable for the 824 Easy Sample Changer have a marking at
each end which indicates the instrument for which the particular end is
intended to be used and the connection to which it is to be connected.
Example (standard Remote cable):
Titrino B
692 / 712 / 713
Before peripheral devices are connected the sample changer must be
switched off as otherwise the instruments could be damaged.
2.6.1 Remote connections
Sample changer — Titrino
with standard cable
B
A
Titrino
C
D
824
Fig. 13
Connecting a 7xx
Titrino
Cable 6.2141.020