Metrohm 824 Easy Sample Changer - Manual (Page 24)

2.7 Serial connection (RS232)
18
824 Easy Sample Changer, Installation
2.7 Serial connection (RS232)
A personal computer can be connected to the serial RS232 interface
25. In this way the 824 Easy Sample Changer can be remotely con-
trolled (in the same way as the Metrohm 730 Sample Changer), pro-
vided that a suitable software such as Tinet 2.5 is installed.
824
Fig. 18 Connecting a computer
A requirement for correct data transfer is that the transmission parame-
ters are correctly set; these must correspond to the settings at the inter-
face of the connected device.
The standard transmission parameters for the 824 Easy Sample
Changer are:
Baud Rate: 9600 Baud
Data Bit. 8
Stop Bit: 1
Parity: none
Handshake: HWs
Cable 6.2125.060 (25p/25p)
oder 6.2125.110 (25p/9p)