Metrohm 824 Easy Sample Changer - Manual (Page 40)

4.6 Method 4
34
824 Easy Sample Changer, Standard methods
4.6.1 Editing methods
The preinstalled standard methods of the 824 Easy Sample Changer
are suitable for most simple measuring and titration tasks. The open
method concept of this universal sample changer also allows adapta-
tion of the standard methods, other methods to be loaded (e.g.
Metrohm 730 Sample Changer methods) or completely new method
sequences to be created.
Fig. 20 6.2142.010 Keypad for
sample changer
By using the "6.2142.010 SC Controller" sample
changer keypad, which has a 2-line display and 30
keys, it is possible to edit all the settings of the 824
Easy Sample Changer in detail and to create, edit and
save methods in an easy way.
This keypad can be obtained from Metrohm under the
Ordering No. 6.2142.010 and can be connected to
the 824 Easy Sample Changer instead of the
conventional keypad.
Information
How to create sample changer methods is described in the Instruc-
tions for Use of the Metrohm 730 Sample Changer (Ordering No.
8.730.1101).
Note
If edited methods are later to be loaded by using the conventional
keypad of the 824 Easy Sample Changer then they must be saved
under the method names 1, 2, 3 or 4.