Banner PS115-1 Sensor Interface Power Supplies - Manual (Page 4)

Hookup Diagrams
PNP Input NPN Input
PS24-1P
PS115-1P
AC
AC
N.O.
N.C.
C
AUX*
V+
V–
Teach
Teach
Remote
Teach
Sourcing Output
IN
T
T
–
+
–
DC Sensor
Relay
Coil
PS24-1N
PS115-1N
AC
AC
N.O.
N.C.
C
AUX*
V+
V–
Teach
Teach
Remote
Teach
Sinking Output
IN
T
T
–
+
–
Relay
Coil
DC Sensor
* AUX is an electrically isolated terminal.
Accessories
BENC-L
• Corrosion-resistant plastic enclosure with
clear polycarbonate cover to protect
module
• Rated NEMA 4X, IP55
• Includes o-ring and 4 each: 1/4"-20x30
and #8 self-tapping screws
• Temperature rating –40 to 70 °C (–40 to
158 °F)
127.8 mm
[5.03"] 2x 1/2" NPSM thread
167.4 mm
[6.59"]
148.1 mm
[5.83"]
59.3 mm
(2.34")
55.9 mm
[2.20"]
87.6 mm
[3.45"]
2xS Ø 8.3 mm
[0.33"]
4x 1/4"-20 x 30
Screws
4X #8 Self-tapping
Screw
PS24-1.. or
PS115-1.. Module
(Order separately)
O-Ring
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following
the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture
which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty
does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR
TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO
EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR
ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE
PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any
obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.
PS24-1 and PS115-1 Sensor Interface Power Supplies
www.bannerengineering.com - tel: 763-544-3164