Banner Q25 Series - Manual

Printed in USA 01/12 P/N 116166 rev. B
Installation
Guide
Q25 Sensors – ac-Voltage Series
Self-contained, ac-operated sensors
* Standard 2 m (6.5') cable models are listed.
• 9 m (30') cable: add suffix “W/30” (e.g., Q253E W/30).
• 4-pin Micro-style QD models: add suffix “Q1” (e.g., Q253EQ1). A model with a QD connector
requires a mating cable.
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for
personnel protection.
!
Sensing Mode Range LED Output Model*
Opposed 20 m (66')
Infrared
950 nm
– Q253E
LO Q25AW3R
DO Q25RW3R
Polarized
Retro-
reflective
2 m (79")
Visible
Red
680 nm
LO Q25AW3LP
DO Q25RW3LP
Fixed
Field
25 mm (1")
cutoff
Infrared
880 nm
LO Q25AW3FF25
DO Q25RW3FF25
50 mm (2")
cutoff
LO Q25AW3FF50
DO Q25RW3FF50
100 mm (4")
cutoff
LO Q25AW3FF100
DO Q25RW3FF100
Additional information on this product is immediately available online at www.bannerengineering.com/116166
View or download additional information, including excess gain curves, beam patterns and accessories.
For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767.
Dimensions
bn
bu
bk
20-250V ac
Load
12.7 mm
(0.50")
Green LED
Power Indicator
Yellow LED
Output Indicator
Cabled Models QD Models
Cabled Emitters
25.0 mm
(0.98")
35.0 mm
(1.38")
30.0 mm*
(1.18")
12.4 mm
(0.49")
(Jam Nut Supplied)
Lens Centerline
15.2 mm
(0.60")
M18 x 1 Thread
2 m (6.5') Cable
*Fixed-field models = 31.0 mm (1.22")
20-250V ac
No Connection
rd/wh
rd/bk
rd
gn
bn
bu
20-250V ac
All Other Cabled Models
QD Emitters
(4-pin Micro-Style)
All Other QD Models
(4-pin Micro-Style)
20-250V ac
No Connection
Load
rd/wh
rd
rd/bk
gn
P
LISTED
R