Banner VTB Verification Touch Buttons - Manual (Page 7)

SMBAMS30P
• Flat SMBAMS series
bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. 300 series stainless
steel
45
93
A
C
B
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMBAMS30RA
• Right-angle SMBAMS ser-
ies bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90°+
rotation
• 12-ga. (2.6 mm) cold-rol-
led steel
53
48
45
A
C
B
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced thermo-
plastic polyester
• Stainless steel mounting
and swivel locking hard-
ware included
67
58
29
B
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
SMB30FA
• Swivel bracket with tilt and
pan movement for precise
adjustment
• Mounting hole for 30 mm
sensor
• 12-ga. 304 stainless steel
• Easy sensor mounting to
extrude rail T-slot
• Metric and inch size bolt
available
A
B 68.9 36.3
83.2
Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A=
M10 - 1.5 x 50
Hole size: B= ø 30.1
Field Covers
Field covers are designed to prevent inadvertent activation of optical touch buttons by objects that accidentally block the sensing beam.
Field covers are constructed of rugged polypropylene and are highly resistant to abrasion and to damage by most chemicals. A variety of
colors is available, allowing color-coding when multiple touch buttons are used. Note that when a field cover is used, it also blocks a
portion of the job light.
Model Description
OTC-1-BK Black cover
OTC Series
Field Cover
51.0 mm
(2.0")
69.0 mm
(2.7")
74.0 mm
(2.9")
OTC-1-GN Green cover
OTC-1-RD Red cover
OTC-1-YW Yellow cover
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of
shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned
to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse,
abuse, or the improper application or installation of the Banner product.
VTB Pick-to-Light Optical Touch Button
P/N 067570 Rev. C www.bannerengineering.com - tel: 763-544-3164 7