Banner K50FL General Purpose EZ-LIGHT - Manual (Page 3)

Specifications
Supply Voltage and Current
T8L models: 5 to 30V dc @ 20 mA max.
T18, M18, and K30L models: 10 to 30V dc @ 25 mA
max.
T30 models: 10 to 30V dc @ 40 mA max.
K50L, K50FL, and K80L models: 18 to 30V dc @ 50
mA max.
Indicators
Entire translucent diffuser or dome provides indication.
Green, Red, or Yellow LED, depending on model. For
other colors, contact Factory for availability.
Input Response Time
Indicator ON/OFF: 1 ms max.
Construction
See Models table.
Connections
K80L models: 4-pin Euro-style integral QD (Q)stand-
ard; terminal-wired models available for use with bulk
cable; compression fitting optional. Contact Factory for
cable information.
Other models: 4-pin Euro-style integral QD (Q), 6" pig-
tail QD (QP), or 4-wire, 2 m (6.5') integral cable, de-
pending on model
Environmental Rating
Rated IEC IP67. T8L not encapsulated; K80L has en-
capsulated electronics only; other models fully encap-
sulated. K30L, K50L, and K50FL QD models meet
IP69K, per DIN 40050-9. Cabled models also meet
IP69K if the cable and cable entrance are protected
from high-pressure spray.
Operating Conditions
−40° to +50° C (−40° to +122° F)
Certifications
All models meet CE; K30L and K50L models also meet
UL
Wiring
For NPN Operation
Green LED Red LED Yellow LED
Pin 1 and Pin 2 not used Pin 4 and Pin 2 not used Pin 1 and Pin 4 not used
For PNP Operation
Green LED Red LED Yellow LED
Pin 1 and Pin 2 not used Pin 4 and Pin 2 not used Pin 1 and Pin 4 not used
Wiring Key:
1 = Brown
2 = White
3 = Blue
4 = Black
EZ-LIGHT™ One-Color General-Purpose Indicators
P/N 130865 rev. D www.bannerengineering.com - tel: 763-544-3164 3