Banner SMBT18Y Mounting Bracket - Manual

SMBT18Y Mounting Bracket
For use with T18 sensors
Printed in USA 10/01 P/N 68502
Features
• Die-cast bracket for mounting into 18 mm holes
• Metal hex nut included
• Accommodates Euro-style QD connectors and cabled versions
25.4 mm
(1.00")
25.4 mm
(1.00")
ø15.3 mm
(60.3")
ø18.3 mm
(0.72")
17.25 mm
(68.0)
12.0 mm
(0.47")
2.0 mm
(0.08")
19.3 mm
(76.0)
M18
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]