Banner K50FL Multi-Function EZ-LIGHT - Manual

Datasheet
DC-operated LED indicators with solid ON or flashing capability and a Euro-style integral QD 1 . Choose from red, yellow, or
green ON, flashing, or rotating (depending on wiring). 2
Models Construction Inputs
M18GRY2PQ
Nickel-plated brass housing, M18x1 thread;
thermoplastic diffuser. Fully encapsulated; IP67.
PNP (Sourcing)
M18GRY2NQ NPN (Sinking)
T30GRY2PQ
Thermoplastic polyester housing, thermoplastic
diffuser. Fully encapsulated; IP67.
PNP (Sourcing)
T30GRY2NQ NPN (Sinking)
K50LGRY2PQ
30 mm threaded polycarbonate base, translucent
polycarbonate dome. Fully encapsulated; IP67.
PNP (Sourcing)
K50LGRY2NQ NPN (Sinking)
K50FLGRY2PQ
Polycarbonate base, translucent polycarbonate
dome. Fully encapsulated; IP67.
PNP (Sourcing)
K50FLGRY2NQ NPN (Sinking)
K80LGRY2PQ 3
ABS and polycarbonate base, translucent
polycarbonate dome. Electronics fully encapsulated;
IP67.
PNP (Sourcing)
K80LGRY2NQ NPN (Sinking)
Other Models: Standard integral QD models only are listed (mating cordset required). To order 2 m (6.5 ft) cable models,
omit suffix Q from model number (example, M18GRY2P). To order models with 150 mm (6 inch) PVC pigtail with 5-pin
Euro QD connector, replace suffix Q with QP (example, M18GRY2PQP).
Specifications
Supply Voltage and Current
M18 Models: 10 to 30 V dc at 40 mA max.
T30 Models: 10 to 30 V dc at 50 mA max.
K50L, K50FL and K80L Models: 18 to 30 V dc at 50 mA max.
Indicators
Entire translucent diffuser or dome provides indication.
LEDs are independently selected: Green, Red, Yellow, ON steady or
flashing.
For other colors/combinations, contact Factory for availability
Input Response Time
Indicator ON: 250 ms (max.)
Indicator OFF: 10 ms (max.)
Indicator Flash Rate
Single Color: 1 second flash rate (500 ms ON)
Three Color: 1.5 second rotation rate (500 ms per color)
Connections
K80L Models: 5-pin Euro-style integral QD (Q) standard. Terminal-
wired models available for use with bulk cable; compression fitting
optional. Contact Factory for cable information.
Other Models: 5-pin Euro-style integral QD (Q); 6" pigtail QD (QP), (do
not use center pin 5); or 5-wire, 2 m (6.5') integral cable
Operating Conditions
Temperature: –40 °C to 50 °C (–40 °F to 122 °F)
Environmental Rating
IEC IP67
K80L has encapsulated electronics only; other models fully
encapsulated
1 Pin 5 is not used; connects to 4-wire QD cordset. If a cordset other than those specified in this document is used, use a 5-pin mating cordset.
2 Contact Factory for other colors/color combinations, including: blue, white, orange.
3 K80L Models: Standard 5-pin Euro integral QD connector models only are listed (mating cordset required). For terminal-wired
model, omit suffix Q (example, K80LGRY2P).
EZ-LIGHT Indicators for 3-Color, 7-Function
Original Document
121902 Rev. I
20 February 2014
121902