Banner WORLD-BEAM QS30 Clear Object Sensor - Manual (Page 11)

P/N 139760 rev. A
11
Banner Engineering Corp. • Minneapolis, MN U.S.A
www.bannerengineering.com • Tel: 763.544.3164
WORLD-BEAM
®
QS30ELVC Series
Retroreflective Targets
Banner offers a wide selection of high-quality retroreflective targets. See the Accessories section of your
current Banner Photoelectric Sensors catalog for complete information. NOTE: QS30ELVC sensors require
corner cube type, large facet retroreflective targets only. Microprism and flexible tape reflectors are not recommended.
BRT-
2X2LVC
• Corner-cube reflector
• 1.0 reflectivity factor*
• Max. temp. +50° C (+122° F)
• Supplied with sensor
BRT-
40X19A
• Corner-cube reflector
• 1.2 reflectivity factor*
• Max. temp. +50° C (+122° F)
• Supplied with sensor
BRT-
92X92C
• Corner-cube reflector
• 3.0 reflectivity factor*
• Max. temp. +50° C (+122° F)
• Optional
*Reflectivity factor when compared with the standard BRT-3 reflector
100 mm
92 mm
92 mm
3.5 mm
9 mm
100 mm Clear
Acrylic
Lens
White
Base
51 mm
56 mm 51 mm
30 mm 10 mm
4.2 mm x 14.2 mm Slot (2)
61 mm
3.5 mm
Clear
Acrylic
Lens
8.9 mm
19.3 mm
50.0 mm 60.2 mm
7.3 mm
ø4.0 mm