Banner PVD100 Pallet Sensor - Manual

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
SMBPVA9 Mounting Bracket Kit
Used for Mounting Parts Verification Array Sensors
Printed in USA 05/03 P/N 114018
• Pair of 2-piece swivel brackets
• Mount directly to sensor or to SMBPVD100(225) protective brackets
• Designed for mounting sensor to “look down” or at an angle ±90°
9.0 mm
(0.35")
13.0 mm
(0.51")
8.5 mm
(0.33")
18.0 mm
(0.71")
30.0 mm
(1.18")
17.5 mm
(0.69") 35.0 mm
(1.38")
2x
ø5.0 mm (ø0.20")
2x
M4 X 0.7
23.9 mm
(0.94")
40.0 mm
(1.57")
16.8 mm
(0.661")
Dimensions
Features
Includes: (4) Self-threading machine screws
(4) M4 Lock washers
(4) M4 Screws
NOTE: Drill 3.7 mm (0.146") holes for mounting with
included self-tapping screws. Use the sensor
mounting holes as a template for drilling the
holes.
Shown with sensor and bracket model SMBPVD100A