Banner Q14 Series - Manual (Page 2)

Q14 Series
page 2
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: 888.373.6767
Receivers with NPN Outputs Receivers with PNP Outputs
bu
+
–
10-30V dc bn
bk
Load
bn +
–
10-30V dc bu
bk
Load
bu
+
–
10-30V dc bn
bk
Load
bn +
–
10-30V dc bu
bk
Load
Q14 Series Hookups
Cabled Hookup Cabled Hookup Cabled Hookup
Quick-Disconnect Hookup Quick-Disconnect Hookup Quick-Disconnect Hookup
Q14 Series Specifications
Certifications
Supply Protection Circuitry Protected against reverse polarity
Output Configuration SPST solid-state dc switch;
Choose NPN (current sinking) or PNP (current sourcing) models
Choose light operate (N.O.) or dark operate (N.C.) models
Output Rating 150 mA maximum
Off-state leakage current: <10 microamps at 30V dc;
On-state saturation voltage: <0.5V at 10 mA dc; <1.0V at 150 mA dc
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs
Overload trip point
≥
220 mA, typical, at 20ºC
Output Response Time 8 ms ON, 4 ms OFF
Indicators Receivers have two LEDs: Green and Yellow
Green glowing steadily = power to sensor is ON
Green flashing = output is overloaded
Yellow glowing steadily = light is sensed
Yellow flashing = marginal excess gain (1-1.5x) in light condition
Emitter: One GREEN LED indicates power to sensor is ON
Repeatability 1.0 ms
Construction Housings are black ABS; Rated UL 94V0
Lenses are hermetically-sealed glass
Stainless steel M3 mounting hardware is included; stainless steel mounting bracket is included
Environmental Rating IP54; NEMA 4
Connections 2 m (6.5') or 9 m (30') attached cable, or 3-pin Pico-style pigtail quick-disconnect fitting. QD cables are
ordered separately.
Operating Conditions Temperature: -20° to +55°C (-5° to +131°F)
Maximum Relative Humidity: 90% at 50ºC (non-condensing)
Supply Voltage and Current 10 to 30V dc (10% maximum ripple); Emitter: 15 mA; Receiver: 15 mA (exclusive of load)
Emitters
Receivers with NPN Outputs Receivers with PNP Outputs Emitters
bn
bu
+
-
10-30V dc
bn
10-30V dc bu
+
–
bk