Multi-beam, Ls10 light screen system, Ls10 series specifications – Banner LS10 Series User Manual

Page 4: Ls10 series hookups

Advertising
background image

MULTI-BEAM

®

LS10 Light Screen System

4

Banner Engineering Corp. • Minneapolis, U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

LS10 Series Specifications

Certifications

Supply Voltage and Current

12 to 30V dc (10% maximum ripple) at less than 70 mA (emitter) or 45 mA (receiver – exclusive of load)

Supply Protection Circuitry

Protected against reverse polarity

Output Configuration

Bipolar: One current sourcing (PNP) and one current sinking (NPN) open-collector transistor

Output Rating

125 mA maximum each output
Off-state leakage current: less than 1 microamp
Output saturation voltage (PNP output): < 1 volt at 10 mA and < 2 volts at 150 mA
Output saturation voltage (NPN output): < 200 millivolts at 10 mA and < 1 volt at 150 mA

Output Protection Circuitry

Protected against false pulse on power-up and continuous overload or short circuit of outputs

Output Response Time

Receiver will respond to a “dark” signal of 1 millisecond or longer duration; a 5-millisecond pulse stretcher
(OFF Delay) is included to improve interfacing reliability; successive parts must have at least 10 millisecond
separation

Repeatability

30 microseconds (light-to-dark)

Resolution

5.6 mm (0.22") or 7.6 mm (0.30"), depending on model

Indicators

Power (emitter only): lights whenever power is applied
Alignment (receiver only): lights whenever light screen is interrupted

Construction

Reinforced thermoplastic polyester housing, acrylic lenses, and stainless steel hardware

Environmental Rating

Meets NEMA standards 1, 2, 3, 12, and 13; IEC IP54

Connections

See product selection tables

Operating Conditions

Temperature:

0° to +50°C (+32° to 122°F)

Maximum relative humidity:

90% at 50°C (non-condensing)

Application Notes

i)

The best sensing resolution occurs near the center of the sensing area, midway between the emitter
and receiver.

ii) Outputs are energized continuously while the light screen is interrupted.

LS10 Emitters with Quick-Disconnect

(3-Pin Mini-Style)

LS10 Receivers with Quick-Disconnect

(4-Pin Mini-Style)

bn

bk

bu

+

12-30V dc

bn

wh

bu

+

bk

12-30V dc

Load

Load

LS10 Series Hookups

Brown Wire

Blue Wire

Black Wire

Black Wire

Blue Wire

Brown Wire

White Wire

Advertising
This manual is related to the following products: