Banner K80 Pick-to-Light EZ-LIGHT - Manual (Page 3)

E-Series 2-Color Models
• Job light is Green at all times while job input is active
• Presence of hand (or pressing push button) activates output
• Presence of hand (or pressing push button) while job input is inactive causes unit to light Red, providing visual verification that sensor
is functioning properly
Model
Sensing Mode /
LED*
Housing Range Cable* Output*** Job Light
K50APLPGREQ
Polarized retroreflec-
tive, visible red, 680
nm
50 mm dome
30 mm mount
polycarbonate
2 m (6 ft)
Integral 4-
pin Euro QD
PNP, N.O.
Green (Red)
K50RPLPGREQ PNP, N.C.
K50ANLPGREQ NPN, N.O.
K50RNLPGREQ NPN, N.C.
K50APFF50GREQ
Fixed field infrared,
880 nm
50 mm cut-
off
PNP, N.O.
K50RPFF50GREQ PNP, N.C.
K50ANFF50GREQ NPN, N.O.
K50RNFF50GREQ NPN, N.C.
K50APFF100GREQ
100 mm cut-
off
PNP, N.O.
K50RPFF100GREQ PNP, N.C.
K50ANFF100GREQ NPN, N.O.
K50RNFF100GREQ NPN, N.C.
K50APPBGREQ
Push button —
PNP, N.O.
K50RPPBGREQ PNP, N.C.
K50ANPBGREQ NPN, N.O.
K50RNPBGREQ NPN, N.C.
K80APPBGREQ
50 mm dome
Flat or DIN-
mount
polycarbonate
PNP, N.O.
K80RPPBGREQ PNP, N.C.
K80ANPBGREQ NPN, N.O.
K80RNPBGREQ NPN, N.C.
* Only 4-pin integral Euro-style QD models are listed. For 2 m (6 ft) PVC cable model, omit suffix “Q” from model number (e.g.,
“K50RPLPGRE”). For 9 m (30 ft) PVC cable model, replace suffix “Q” with “W/30” (e.g., “K50RPLPGRE W/30”). For 150 mm (5.9 in)
PVC pigtail with 4-pin Euro-style fitting, replace suffix “Q” with “QP” (e.g., “K50RPLPGREQP”).
A model with a QD requires a mating cable (see
4-pin Euro-Style Cordsets ).
**N.O. = Normally Open; N.C. = Normally Closed
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to seri-
ous injury or death. This product does NOT include the self-checking redundant circuitry necessary to
allow its use in personnel safety applications. A sensor failure or malfunction can cause either an ener-
gized or de-energized sensor output condition.
EZ-LIGHT® K50 and K80 Series Pick-to-Light Sensors
P/N 126441_web
Rev.G www.bannerengineering.com - tel: 763-544-3164 3