Banner MAXI-AMP Series - Manual

MODEL
CP12C
CP12RC
None
105 to
130V ac
(15 VA)
or
210 to
250V ac
(15 VA)
50/60Hz
SPDT
5-amp
electro-me-
chanical
INPUT
VOLTAGE
OUTPUT DE-
VICE
OUTPUT
POWER
120V ac Hookup Diagram, CP12C 120V ac Hookup Diagram, CP12RC
220/240V ac Hookup Diagram, CP12RC 220/240V ac Hookup Diagram, CP12C
Printed in USA P/N 03460C3B
Banner Engineering Corp. 9714 10th Ave. N., Minneapolis, MN 55441 Telephone: (763) 544-3164 FAX (applications): (763) 544-3573
400
milliamps
maximum
for
10-30V
dc sensing
devices
MAXI-AMP
™
System
CP Series Power Supply Modules
Dimensions Load Curve
MAXI-AMP CP Series power supply modules provide a convenient
source of power for 10 to 30V dc sensing devices such as Banner
self-contained dc sensors and/or any of the Banner logic modules and
remote amplifiers. It is an excellent way to supply power to a system
using multiple MAXI-AMP modules and associated sensors.
These supplies are designed for either 120 or 220/240V ac input volt-
age (see hookup diagrams). They offer 400 milliamps for powering
10 to 30V dc devices.
Model CP12RC includes a relay which may be switched by a current
sinking device (pin #2) or a current sourcing device (pin #8). The relay is
a single-pole double-throw (SPDT) 5 amp electromechanical type.
CP series power supplies are built into the rugged MAXI-AMP housing.
They connect via a standard 11-pole round-pin relay socket (Banner
RS-11). The RS-11 socket allows DIN rail mounting of the power
supply. Operating temperature for CP series power supply modules
is 0 to 50 degrees C (32 to 122 degrees F).
SINKING INPUT
8
7
6
5
4
9
10
11
1
2
3
CR
+V output (see load curve)
dc COMMON
RELAY OUTPUT
5 AMP CONTACTS
105 to 130V ac
CP12RC
SOURCING INPUT
+12V CR
8
7
6
5
4
9
10
11
1
2
3 +V output (see load curve)
dc COMMON
RELAY OUTPUT
5 AMP CONTACTS
210 to 250V ac
CP12RC
SOURCING INPUT
SINKING INPUT
CR
+12V CR