Banner MINI-BEAM Expert Series - Manual (Page 9)

Glass Fiber Models
(Suffix F, FV, FVB, FVG, FVW)
Plastic Fiber Models
(Suffix FP, FPB, FPG, FPH, FPW)
M18 x 1 x 19 mm Thread
(Mounting Nut Supplied)
57.5 mm (2.27")
31.2 mm (1.23")
Fiber Optic Fitting
3.2 mm (0.13”) 12.2 mm (0.48”)
3 mm dia clearance (2)
Fiber
Optic
Fitting
22.3 mm
(0.88”)
16.2 mm
(0.64”) 42.1 mm
(1.66”)
19.1 mm
(0.75”)
Mounting Peg
(6.3 mm dia × 2.5 mm)
2 m (6.5’) Cable
30.7 mm
(1.21”)
24.1 mm
(0.95”)
QD Models
20.0 mm
(0.79”)
12 mm Thread
Quick-disconnect
Wiring
Cabled Models QD Models
bn
Remote
Teach
bu
wh
bk
gy
+
10-30V dc
–
Load
Load
bn
Remote
Teach
bu
wh
bk
gy
+
10-30V dc
–
Load
Load
Accessories
Retroreflective Targets
Banner offers a wide selection of high-quality retroreflective targets. See your current Banner Engineering Corp catalog for complete
information on available models. Sensing range will vary, according to the retroreflector’s efficiency and reflective area.
• For high-vibration applications: model BRT-36X40BM (micro-prism geometry) is recommended.
• For long-range applications: model BRT-77X77C reflector provides a range up to 2 m (6.5').
• For clear object detection (low-contrast applications): reflector model BRT-2X2 is recommended; one comes bundled with each
SME312LPC(QD) sensor.
• Polarized sensors require corner-cube type retroreflective targets only; reflective tape is not recommended.
Before installing retroreflective tape, clean the mounting surface with an isopropyl alcohol wipe.
Optional brackets for mounting reflective targets are available. See the Accessories section of your current Banner catalog or our website
at
www.bannerengineering.com .
MINI-BEAM SME312 Expert Series
P/N 055214 Rev. F www.bannerengineering.com - tel: 763-544-3164 9