Banner MINI-BEAM Series User Manual

Mini-beam sm31e/r opposed mode sensors, Datasheet

Advertising
background image

Datasheet

Compact, self-contained opposed mode modulated infrared sensor pairs for 10 to

30 V dc operation

Standard sensor pairs have 3 m (10 ft) range; long range sensor pairs have 30 m

(100 ft) range

Switch-selectable for light operate or dark operate; highly repeatable, 1

millisecond response

Both sourcing and sinking outputs (150 mA maximum each)

Receivers include Banner’s exclusive AID

alignment system, US patent number

4356393

Rugged, epoxy-encapsulated construction: meets NEMA standards 1, 2, 3, 3S, 4,

4X, 6, 12, and 13, IEC IP67

Physically and electrically interchangeable with 18 mm barrel-type photoelectrics

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models 1 2

Range

Cable

Excess Gain

Beam Pattern

SM31E (Emitter)

3 m (10 ft)

2 m (6.5 ft)

1

10

100

.10 m

.33 ft

1.0 m

3.3 ft

10 m

33 ft

.01 m

.033 ft

Distance

1000

Excess Gain

SM31E & SM31R

Opposed Mode

3.0 m

10 ft

2.4 m

8 ft

1.8 m

6 ft

1.2 m

4 ft

0.6 m

2 ft

0

0

100 mm

200 mm

300 mm

100 mm

200 mm

300 mm

0

4.0 in

8.0 in

12.0 in

4.0 in

8.0 in

12.0 in

Distance

SM31E & SM31R

Opposed Mode

SM31R (Receiver)

SM31EQD (Emitter)

4-Pin Euro QD

SM31RQD (Receiver)

SM31EL (Emitter)

30 m (100

ft)

2 m (6.5 ft)

1

10

100

1.0 m

3.3 ft

10 m

33 ft

100 m

330 ft

0.1 m

0.33 ft

1000

Distance

SM31EL & SM31RL

Opposed Mode

Excess Gain

30 m
100ft

24 m

80 ft

18 m

60 ft

12 m

40 ft

6 m

20 ft

0

0

250 mm

500 mm

750 mm

250 mm

500 mm

750 mm

0

10.0 in

20.0 in

30.0 in

10.0 in

20.0 in

30.0 in

Distance

SM31EL & SM31RL

Opposed Mode

SM31RL (Receiver)

SM31ELQD (Emitter)

4-Pin Euro QD

SM31RLQD (Receiver)

1 To order the 9 m (30 ft) cable models, add the suffix “W/30” to the model number of any cabled sensor (e.g., SM31EL W/30). To

order the 150 mm (6 inch) long pigtail cable with attached QD connector models, add the suffix “QDP” to the model number of

any MINI-BEAM sensor (e.g., SM31ELQDP). Models with a QD connector require an accessory mating cable.

2 To order emitters and receivers with 0.3 millisecond on/off response, add the suffix “MHS” to the model numbers (e.g.,

SM31EMHS & SM31RMHS). This modification reduces sensing range (and excess gain).

MINI-BEAM SM31E/R Opposed Mode

Sensors

Original Document

03560 Rev. D

14 April 2014

03560

Advertising