Banner MINI-BEAM Series - Manual (Page 12)

MINI-BEAM Universal Voltage Series
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for
one year. Banner Engineering Corp. will repair or replace, free of charge, any product of
its manufacture found to be defective at the time it is returned to the factory during the
warranty period. This warranty does not cover damage or liability for the improper
application of Banner products. This warranty is in lieu of any other warranty either
expressed or implied.
SMB18C
• 18 mm split clamp black thermoplastic polyester
• Stainless steel mounting hardware included
• Not for use with FP Models
SMB18SF
• 18 mm swivel, black thermoplastic polyester
• Stainless steel mounting hardware included
• Not for use with FP Models
40.0 mm
(1.60")
42.4 mm
(1.67")
30.0 mm
(1.18")
2.5 mm
(0.10")
21.1 mm
(0.83")
Nut Plate
M5 x 0.8
x 60 mm
Screw (2)
13 mm
(0.5")
14.0 mm
(0.55")
36.0 mm
(1.42")
50.8 mm
(2.00")
42.0 mm
(1.65")
22.9 mm
(0.9")
25.4 mm
(1.00")
10.6 mm
(0.42")
ø15.0 mm
(0.59")
MINI-BEAM Mounting Brackets
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 888.373.6767 • http:\\www.baneng.com • Email: [email protected]
SMB3018SC
• 18 mm swivel barrel or side mount
• Black thermoplastic polyester
SMB3018SUS
• Side mount swivel bracket – extended range of motion
• Black thermoplastic polyester
50.8 mm
(2.00")
56.7 mm
(2.31")
Assembled
29.0 mm
(1.14") 68.0 mm
(2.68")
66.5 mm
(2.62")
M18 x 1
internal
thread
2 x Hole for
#6 Machine Screw
50.8 mm
(2.00")
56.7 mm
(2.31")
Assembled
29.0 mm
(1.14") 68.0 mm
(2.68")
66.5 mm
(2.62")