Recommended radio equipment, Required tools and adhesives, Optional accessories – E-flite BAe Hawk 15 DF ARF User Manual

Page 3: Required brushless ducted fan setup, Note on lithium polymer batteries, Warning

Advertising
background image

3

E-flite BAe Hawk ARF Assembly Manual

Recommended Radio Equipment

You will need a minimum 4-channel transmitter,

receiver and four or five servos (if using nose gear

steering). You can choose to purchase a complete

radio system. If you are using an existing transmitter,

just purchase the other required equipment separately.

We recommend the crystal-free, interference-free

Spektrum

DX6i 2.4GHz DSM

®

6-channel system. If

using your own transmitter, we recommend the E-flite

®

S75 Super Sub-Micro servos .

If you own the Spektrum DX6i radio, just add

the AR6200 DSM2

6-channel receiver and four or

five (nose gear steering) E-flite S75 Sub-Micro servos.

Complete Radio System

SPM6600

DX6i DSM2 6CH system

Or Purchase Separately

SPMAR6200

AR6200 DSM2 6-Channel Full-

Range Receiver (for DX6i or

DX7)

And

EFLRS75

7.5-gram Sub-Micro S75 Servo

EFLREX3L

3-inch Extension, Lightweight (2)

EFLREX9L

9-inch Extension, Lightweight (2)

Required Brushless Ducted Fan Setup

EFLM3015DF

15 DF Brushless Motor, 3600Kv

EFLDF15

Delta V 15 (69mmm) Ducted

Fan Unit

EFLA1060

60-Amp Pro Switch-Mode

BEC Brushless ESC

EFLB32003S

3200mAh 3S 11.1V 20C Li-Po,

13GA EC3

Required Tools and Adhesives

Tools & Equipment

Drill

Epoxy brushes

Felt-tip pen

Hex wrench: 1.5mm

Hobby scissors

Low-tack tape

Mixing cups

Mixing sticks

Needle-nose pliers Medium grit sandpaper

Paper towels

Pencil

Pin drill

Rubbing alcohol

Ruler

Scissors

Side cutters

Square

String/dental floss Toothpicks

T-pins

Waxed paper

Phillips screwdriver: #0, #1

Hobby knife (#11 blade)

Drill bit: 1/16-inch (1.5mm), 5/64-inch (2mm)

Adhesives

Threadlock

6-Minute Epoxy (HAN8000)

Canopy glue

12-Minute Epoxy (HAN8001)

Thin CA

Medium CA

Optional Accessories

PKZ4414

Pilot: T-28

EFLA110

Power Meter

EFLC3005

Celectra

1- to 3-Cell

Li-Po Charger

EFLC505

Intelligent 1- to 5-Cell

Balancing Charger

Note on Lithium Polymer Batteries

Lithium Polymer batteries are significantly

more volatile than alkaline or Ni-Cd/

Ni-MH batteries used in RC applications.

All manufacturer’s instructions and warnings

must be followed closely. Mishandling of

Li-Po batteries can result in fire. Always

follow the manufacturer’s instructions when

disposing of Lithium Polymer batteries.

Warning

An RC aircraft is not a toy! If misused, it can cause

serious bodily harm and damage to property. Fly

only in open areas, preferably at AMA (Academy of

Model Aeronautics) approved flying sites, following all

instructions included with your radio.

Keep loose items that can get entangled in the

propeller away from the prop, including loose clothing,

or other objects such as pencils and screwdrivers.

Especially keep your hands away from the propeller.

During the course of building your BAe Hawk we

suggest that you use a soft base for the building

surface. Such things as a foam stand, large piece of

bedding foam or a thick bath towel will work well and

help protect the model from damage during assembly.

The Spektrum trademark is used with permission

of Bachmann Industries, Inc.

Advertising