E-flite Mini Funtana X ARF - Manual (Page 13)

 1. Place the landing gear onto the bottom of
the fuselage. They will angle forward when
installed in the correct direction. Attach with
two 4-40 x 3/8" machine screws and two #4
black washers.
Landing Gear Installation
Required Parts
Fuselage
Main landing gear
Wheel pant (L&R)
1
3 /
4
" (45mm) wheel (2)
4-40 x 3/8" machine screws (2)
#4 black washers (2)
4-40 nut (2)
4-40 locknut (2)
4-40 x 1" machine screw (2)
#4 steel washers (4)
2mm x 6mm wood screws (2)
Required Tools and Adhesives
Phillips screwdriver (small)
Needle-nose pliers
Nut driver: 1/4"
Hex wrench: 3/32"
Note:.You.may.consider.using.a.larger.diameter.
wheel,.such.as.2
1
/
4
".(58mm).(EFLA224),.if.your.
flying.site.has.rough.terrain..By.using.a.larger.
wheel,.you.will.not.be.able.to.use.the.included.
wheel.pants.
13