E-flite Mini Funtana X ARF - Manual (Page 29)

29
  5. Use 6-minute epoxy to glue the fairing to the
wing. Make sure not to get glue on the fuselage.
Use tape to hold the fairing tight against the wing
while the epoxy cures.
Note:.The.fairing.may.not.fit.tight.against.the.
fuselage.at.this.time..This.will.be.addressed.
once.both.fairings.have.been.installed.
  6. Repeat Steps 3 through 5 for the remaining
wing panel and fairing.
 7. Secure the fairings together inside the fuselage
using the fairing spring and pliers.