E-flite Mini Funtana X ARF - Manual (Page 40)

Final Assembly
Required Parts
Fuselage
Wing
Canopy
Receiver
Battery
Battery hatch
4-40 x 1" socket head bolt (2)
#4 washer (2)
Hook and loop tape
Hook and loop strap
Required Tools and Adhesives
Hex wrench: 3/32"
Felt-tipped pen
Canopy glue
 1. Plug in the elevator and rudder servos and ESC
into the receiver. Mount the receiver to the inside
of the fuselage using hook and loop material.
Route the antenna wire through the bottom of the
fuselage to the rear, or as directed by your radio
instruction manual.
Note:.Do.not.cut.or.change.the.length.of.the.
antenna.wire,.as.this.will.reduce.the.range.of.
your.radio.system.
40