Important information about motor selection, High power outrunner setup, Optional accessories – E-flite Mini Funtana X ARF User Manual
Page 6: Required tools and adhesives, Important.information.about.motor.selection, High.power.outrunner.setup, Optional.accessories, Required.tools.and.adhesives
Important Information About Motor
Selection
We recommend the E-flite
®
Park 480 Brushless Outrunner,
1020Kv (EFLM1505) to provide you with excellent sport
and aerobatic power and a worry-free outrunner motor.
The Mini FuntanaX does not include a propeller.
High Power Outrunner Setup
EFLM1505
Park 480 Brushless Outrunner
Motor, 1020Kv
EFLA312B
40-Amp Brushless ESC
THP21003SPL
2100mAh 3-Cell 11.1V Li-Po,
16GA
APC12060E
12 x 6 Electric Prop
EFLAEC302
EC3 Battery Connector, Female (2)
EFLC3005
Celectra 1- to 3-cell Li-Po Charger
This is a high power performance setup for
strong 3D flights.
Optional Accessories
EFLA110
Power Meter
Required Tools and Adhesives
Tools & Equipment
EFLA250
Park Flyer Tool Assortment, 5-piece
Or Purchase Separately
EFLA257
Screwdriver, #0 Phillips (or included
with EFLA250)
EFLA251
Hex Wrench: 3/32" (or included
with EFLA250)
Nut driver: 1/4"
Drill
Drill bit: 1/16" (1.5mm), 5/64" (2mm)
Masking tape
Card stock
Felt-tipped pen
Needle-nose pliers
Canopy glue
Medium grit sandpaper
T-pins
Thin CA
Paper towels
Hobby knife
6-minute epoxy
Ruler
Square