E-flite Mini Funtana X ARF - Manual (Page 26)

 7. Attach the micro control connector to both
servo arms. Be sure to use the included retainer
to secure the micro control connector to the
servo arms.
Note:.Use.the.long.3D.servo.arms.included..
with.your.servos.to.provide.the.greatest..
amount.of.throw.
 8. Turn on the radio system and center the aileron
trim and stick. Make sure the aileron servo is
operating properly using the transmitter. Slide the
pushrod wire through the micro connector. Install
the servo arm 90-degrees to the servo. Center the
aileron, and secure the position of the wire using
the 2mm x 4mm screw and a Phillips screwdriver.
26