E-flite Mini Funtana X ARF - Manual (Page 34)

Rudder and Fin
Required Parts
Fuselage Rudder
Fin CA hinge (3)
Required Tools and Adhesives
Hobby knife Thin CA
Felt-tipped pen Square
6-minute epoxy Medium grit sandpaper
 1. Roughen the tail wheel assembly using medium
grit sandpaper. Use 6-minute epoxy to glue the
tail wheel assembly into the rudder.
 2. Hinge the rudder and fin, using the same process
as described in Aileron Hinging. Use 3 hinges for
this process.
 2. Place the fin in position on the fuselage. Trace the
outline of the fuselage onto both sides of the fin.
34