E-flite Mini Funtana X ARF - Manual (Page 15)

Outrunner Motor Installation
Required Parts
Fuselage
Brushless motor
4-40 x 3/8" machine screw (4)
Required Tools and Adhesives
Hex wrench: 3/32"
Screwdriver (Phillips #0)
Note:.This.section.covers.the.installation.of.the.
recommended.Park.480.Outrunner.motor..The.
holes.in.the.firewall.match.the.mounting.pattern.
of.the.X-mount.
 1. Attach the supplied aluminum motor X-mount
to the motor using the screws provided with the
motor. The wider section of the mount will be
positioned toward the motor wires.
15