Aileron hinging, Aileron.hinging – E-flite Mini Funtana X ARF User Manual
Page 20
Advertising
Aileron Hinging
Required Parts
Wing (left and right)
Aileron (left and right)
CA hinges (8)
Required Tools and Adhesives
T-pins
Thin CA
Drill
Paper towel
Drill bit: 1/16" (1.5mm)
1. Locate the positions for the hinges. Drill a
1/16" (2mm) hole in the center of each slot of
both the wing and aileron. This creates a tunnel
for the CA, allowing the CA to penetrate into the
hinge better, bonding the hinges more securely.
20
Advertising