GBC EBA 721-05 LT - Manual (Page 4)

- 4 -
EBA 721-05
1. General
This instruction manual will help you to learn the
safe and comfortable operation of this machine.
Please read these operating instructions before
putting the machine into operation and observe the
safety regulations.
1.1 Safety Precautions
Danger!
Non-compliance with the instructions may
endanger persons.
Warning!
Non-compliance with the instructions may
cause damage to the machine.
The operating instructions must always be
available for the operator.
All components which could endanger the operator
are covered by a guard. The side panels are
screwed to the machine.
This machine is constructed for "one-man
operation" only!
The dangerous cutting movement is safeguarded by
a cover (3), a two-handed control system (2) and a
safety beam guard (1).
1.2 Application
The machine is designed for cutting stacks of paper
to a specified size. Setting the measurement is
done via buttons or hand wheel. Cutting is released
by a "two-handed control system".
Danger!
Only instructed persons are allowed to operate
the machine.
Children must not operate the machine!
Danger!
Do not cut hard materials or materials which
may splinter.
Warning!
The machine may only be used for cutting
paper or similar materials. Paper clips or hard
material will damage the cutting blade.