Operation – GBC EBA 721-05 LT User Manual
Page 7
- 7 -
03-01
04-01
3. Operation
Danger!
It is forbidden to operate the machine if the
operating and safety instructions have not
been understood.
Danger!
Please check the safety devices are
functioning and complete before use and after
replacing the blade.
Checklist
- Machine panels:
All panels have to be mounted
- Cutting activation:
The release for cutting is allowed only if the
"two-hand safety device" (1) is operated at the
same time.
- Safety light beam
Do not reach into the cutting area (38) when in
motion.
We recommend you keep a record of your test
results.
Cutting sequence (1) with automatic clamping:
+
Airtable (9) optional
The airtable allows paper to be easily positioned.
Setting clamping pressure (7)
The clamp pressure can be adjusted using the
adjustment knob (7).
© The clamping pressure can be read on the light
panel (19).