Reloop JOCKEY 3 ME INKL. TRAKTOR LE 2 - Manual (Page 36)

ENGLISH
36
Lateral View
2. INITIAL OPERATION
- First make sure to turn off the device via the ON/OFF Button -B56- on the rear panel.
- Connect the included mains adapter to the device‘s DC jack -B55- and a shock-proof outlet.
- Then connect the included USB cable to the corresponding connection -B57- on the device‘s rear
panel and a free USB port of your computer.
3. COMPUTER CONFIGURATION
Before you can use your new device a few basic computer adjustments have to be carried out.
ATTENTION!
Please make sure that your Reloop Jockey 3 is still turned off. You will be asked during the ins-
tallation to turn the device on.
The included USB cable can already be connected.
Please pay special attention to the following explanations.
3.1 ASIO DRIVER INSTALLATION
Insert the included installation CD in your computer‘s drive. Select the driver that best suits your
system in the „Drivers“ folder and start the installation via a double click.
TIP!
Reloop regularly provides updated drivers online. For more information please read the chapter
„Updates & Support“.
NOTE!
Please make sure to start the driver installation with admin rights. Otherwise the installation will
fail with an error message.
When using Windows Vista or Windows 7 please carry out the appropriate installation setup via a
click of the right mouse button. Then select „Run as admin“.
1. First of all you will enter the language select window. Please select your preferred language.
# Designation
S69 Jog Wheel Drag
S70 Kensington Lock