Reloop JOCKEY 3 ME INKL. TRAKTOR LE 2 - Manual (Page 53)

ENGLISH
53
How to carry out a firmware update
1. Make sure that the Jockey 3 is turned off (see position On/Off Button -B56-) and connected via
USB to your computer.
2. Press and hold the right CUP Button -T25- and the right CUE Button -T26- and simultaneously
turn on the Jockey 3 via the On/Off Button -B56-.
3. Now release both buttons.
4. Now the upper LEDs of the UV meter blink. The Jockey 3 is now in update mode.
5. Start the firmware update tool from the installation CD and open the firmware file that corres-
ponds to your computer.
6. Carry out the firmware update by clicking the „Start“ button.
7. The new firmware will be uploaded to the device.