Reloop JOCKEY 3 ME INKL. TRAKTOR LE 2 - Manual (Page 45)

ENGLISH
45
Element Funktion Funktion bei aktivem Shift -T3-
T21 Jog Wheel Mode Buttons
There are 4 modes at your disposal which de-
termine the jog wheel‘s function.
- SCRATCH
If this mode is active, it is possible to scratch
the current track as long as the jog wheel‘s
-T22- surface is being touched. If only the side
is being touched, the current track‘s pitch can
be increased (clockwise) or decreased (counter-
clockwise).
- PITCH BEND
Herewith it is possible to increase (clockwise) or
decrease (counterclockwise) the track‘s pitch.
As opposed to SCRATCH mode the jog wheel‘s
-T28- rotational speed influences a track‘s
manipulation.
- SEARCH
Allows quick scrolling through a loaded track.
- TRAX
By activating this mode Traktor automatically
switches to browse view. Now it is possible to
navigate comfortably through the track list via
the Jog wheel -T22-.
A complete navigation in folder as well as track
list in Traktor can be executed via the TRAXEn-
coder -T28-. Crossfader Select Buttons
Via these buttons it is possible to
determine which deck is routed to
which crossfader side.
T22 Jog Wheel
Herewith it is possible to execute various
functions. Please refer to the jog wheel mode
buttons -T21-.
T23 Shift Button
By pressing this button all the device‘s control
elements receive a different function assign-
ment. The current assignment can be viewed
on the right side of this chart.
T24 Sync Button
The current track‘s pitch will be synchronized
to the master deck. Master Deck Assignment
The current deck becomes the
master deck.
T25 Cup Button
As long as this button is being pressed and
held, the deck jumps to the last set cue point
and stops. Releasing the button will start
playback. Tap Button
Determines the track‘s pitch, de-
pending on how quickly the button
will be repeatedly pressed. Ideally
it should be pressed to every beat
should the grid not be fitting.
T26 Cue Button
Herewith the cue point will be called up and
played as long as the button is being pressed. FX Mode Button
Herewith it is possible to switch
between Advanced Effect Mode
and Chained Effect Mode.
T27 Play/Pause Button
Starts and pauses the track‘s playback respec-
tivley. Keylock
(De-)activates Keylock.
T28 Tracklist Navigation
- By turning the encoder it is possible to scroll
through the track list.
- By pressing the encoder browse view will be
maximized. Folder Navigation
- By turning the encoder it is pos-
sible to navigate the folder list.
- Pressing the encoder opens and
closes the selected folder.
T29 Load Buttons
By pressing this button the selected track will
be assigned to the respective deck. Favorites Navigation
Via these buttons it is possible to
scroll through the favorites.
T30 Deck Select Switch
Via this switch it is possible to select the cont-
rolable decks. If the switch is in the Input posi-
tion, the mixer can be used as analog mixer.