Reloop JOCKEY 3 ME INKL. TRAKTOR LE 2 - Manual (Page 43)

ENGLISH
43
Element Funktion Funktion bei aktivem Shift -T3-
T1 Pitchfader
Herewith it is possible to adjust the current
deck's (see -T30-) pitch. Keyfader
Herewith it is possible to adjust
the current deck‘s key.
T2 Dry/Wet Dial
With this encoder it is spossible to adjust the
effect‘s intensity. Effekt Change <Advanced E.>
If the Advanced Effect section is
selected, it is possible to change
the effect by turning the encoder.
T3 Effect Parameter <Advanced E.>
In Advanced Effect Mode the parameters can
be adjusted herewith.
Dry/Wet Fine Adjustment <Chained E.>
If Chained Effect Mode is used, the single ef-
fects can be operated.
NOTE!
In Traktor LE only the 1st parameter in Chained
Effect Mode works. Effect Change <Chained E.>
In Chained Effect Mode it is
herewith possible to change the
respective effect.
NOTE!
In Traktor LE only the 1st effect
from the effect section works.
T4 FX On Button <Advanced E.>
Activates the Advanced FX Section correspon-
ding to the deck (Deck A 4 FX1, Deck B 4 FX2,
Deck C 4 FX3, Deck D 4 FX4) FX-Preset-1-Taste
consists of:
Beatmasher 2
Digital LoFi
Reverse Grain
T5 Effect Reset Function <Advanced E.>
In Advanced Effect Mode it is possible to reset
the effect herewith.
FX 1 On <Chained E.>
Activates and deactivates the 1st effect in
Chained Effect Mode respectively. FX Preset 1 Button
consists of:
Beatmasher 2
Digital LoFi
Reverse Gain
T6 Effect Button 1 <Advanced E.>
Activates and deactivates the Effect Button 1
in Advanced Effect Mode.
FX 2 On <Chained E.>
Activates and deactivates the 2nd effect in
Chained Effect Mode respectively. FX Preset 3 Button
consists of:
Beatmasher 2
Reverb
Reverse Gain
T7 Effect Button 2 <Advanced E.>
Activates and deactivates the Effect Button 2
in Advanced Effect Mode.
FX 3 On <Chained E.>
Activates and deactivates the 3rd effect in
Chained Effect Mode. FX-Preset-4-Taste
consists of:
Delay
Filter
Reverb
T8 Loop Length
Turning the encoder varies a set loop‘s length.
Pressing the encoder activates and deactiva-
tes the Loop Active Function respectively.
T9 Loop Shift
Turning the encoder shifts a set loop‘s positi-
on.
Pressing and simultaneously turning the enco-
der determines the movement‘s step size.
4. OPERATION
After connecting and configuring Reloop Jockey 3 correctly for the DJ software, Traktor can now be
used. If Traktor Pro is used, it is possible to fully utilize the Jockey 3 user interface. There are some diffe-
rences for Traktor LE regarding effect control, the number of usable decks and the hot cue assignment.
4.1 TRAKTOR FUNCTION ASSIGNMENT
NOTE!
In the following the whole Traktor function assignment will be described. Some features are
only available in Traktor Pro and therefore they have been marked grey in the following chart.