Revel F30 - Manual (Page 13)

Figure 8. How to connect the
REVEL PERFORMA F30
loudspeaker in a
single-wired system.
Figure 9. How to connect the
REVEL PERFORMA F30
loudspeaker in a
bi-wired system.
SINGLE-WIRED SYSTEM CONNECTIONS
For single-wired applications, simply leave the shorting straps in
place and connect the + and - from a single amplifier channel to the
+ and – terminals on the rear of the REVEL PERFORMA F30
loudspeaker, as shown in Figure 8.
BI-WIRED SYSTEM CONNECTIONS
A bi-wired system uses two pairs of loudspeaker wires connected to
a single amplifier channel. On the rear of the REVEL PERFORMA
F30 loudspeaker, remove the shorting straps and connect the + and
- of one pair of wires to the HIGH FREQUENCY INPUT termi-
nals and the + and - of the other pair of wires to the LOW FRE-
QUENCY INPUT terminals, as shown in Figure 9.
Check with your Revel dealer for recommendations and possible
benefits for your application.
CAUTION: Failure to remove the shorting straps when bi-wiring
may damage some amplifiers.
REVEL PERFORMA F30
Owner’s Manual
13
Install straps for single-wire operation
Install straps for single-wire operation
Low Frequency Input High Frequency Input
Remove straps
for bi-wire
or bi-amp
+1 -1 0 +.5 -.5
Front Tweeter Level (dB)
Serial Number Revel
Northridge, California
Made in U.S.A.
xxxx
Install straps for
single-wire operation
Install straps for
single-wire operation
Low Frequency Input High Frequency Input
Remove straps
for bi-wire
or bi-amp
+1 -1
0 +.5 -.5
Front Tweeter Level (dB)
Serial Number
xxxx
Revel
Northridge, California
Made in U.S.A.
Shorting Strap
(leave both in place)
red blk
REVEL
PERFORMA
F30
Rear
Connector Panel
Amplifier
(rear)
(one channel shown)
(one channel shown)
Install straps for single-wire operation
Install straps for single-wire operation
Low Frequency Input High Frequency Input
Remove straps
for bi-wire
or bi-amp
+1 -1 0 +.5 -.5
Front Tweeter Level (dB)
Serial Number Revel
Northridge, California
Made in U.S.A.
xxxx
Install straps for
single-wire operation
Low Frequency Input High Frequency Input
Remove straps
for bi-wire
or bi-amp
+1 -1
0 +.5 -.5
Front Tweeter Level (dB)
Serial Number
xxxx
Revel
Northridge, California
Made in U.S.A.
Shorting Straps Removed
red blk
REVEL
PERFORMA
F30
Rear
Connector Panel
Amplifier
(rear)
(one channel shown)
(one channel shown)