Revel F30 - Manual (Page 7)

Figure 4. Installing
an optional top grille.
6. Repeat steps 1 through 5 for the other loudspeaker.
NOTE: We recommend installing spikes after determining final
speaker placement (see discussion starting on next page).
After unpacking both units, carefully inspect each one for possible
damage due to shipping. If you discover any damage, immediately
contact your Revel dealer for further assistance. To move an
unpacked REVEL PERFORMA F30 loudspeaker (e.g., when
experimenting with placement), rock it side-to-side into place,
using caution to avoid touching the tweeter and midrange.
Keep all packing materials for future shipping. In the unlikely
event a product will need repair, Revel will only accept a unit in its
original shipping carton. Using any other packing materials may
result in damage to the product and is not covered by the warranty.
See Service Information on page 17 for additional details.
INSTALLING TOP GRILLES
(OPTIONAL)
If desired, install an optional top grille onto each REVEL
PERFORMA F30 loudspeaker, as shown in Figure 4 below.
REVEL PERFORMA F30
Owner’s Manual
7
,, ,,,,,,
,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,
,, ,,,,, ,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,
,,,,,,,,
,,,,
,
Top
Grille
align clips
with grooves