Revel F30 - Manual (Page 5)

MIDRANGE
The 5.25-inch (133 mm) inverted magnesium-dome midrange
transducer features:
• True pistonic operation for increased freedom from coloration.
• Optimized and shielded magnetic circuits to minimize harmonic
distortion and prevent interference with video monitors.
• Butyl rubber surround for large, linear excursion capabilities.
• Oversized 1.5-inch (38 mm) voice coil wire on a Kapton ®
bobbin for low mass with increased strength.
TWEETER
The 1-inch (25 mm) aluminum-alloy dome tweeter features:
• True pistonic operation for increased freedom from coloration.
• Underhung with copper-clad aluminum wire for low distortion.
• Ferrofluid for better power handling with reduced compression.
• Magnetically shielded to prevent interference with video monitors.
CROSSOVER NETWORK
Each REVEL PERFORMA F30 loudspeaker has an individually-
optimized crossover network with:
• A high-order crossover at 220 Hz and 2.8 kHz to optimize the
on- and off-axis response of the system.
• Filter networks with carefully selected components for optimum
performance with low distortion across a wide dynamic range.
• Provision for bi-amplified applications via removable external
shorting straps on the gold-plated binding posts.
CABINET
The cabinet is constructed of 1-inch (25 mm) thick MDF walls
with extensive internal bracing for unshakable performance.
A rounded front baffle is sculpted to reduce diffraction, and four
cast aluminum feet adorn the cabinet for superior coupling to any
floor. The wood-veneer cabinet is available in finishes of Cherry,
Sycamore, Rose, or Black Ash.
REVEL PERFORMA F30
Owner’s Manual
5