Revel F30 - Manual (Page 6)

WARNING
Figure 3. A REVEL
PERFORMA F30 loudspeaker
with its inner packing materials.
UNPACKING
IMPORTANT! Do not attempt to lift a REVEL PERFORMA F30
loudspeaker from its packing carton alone – use at least two strong
people to unpack the product properly. To avoid injury, use
extreme care during unpacking. Always stand as straight as possi-
ble and use your leg muscles to lift the REVEL PERFORMA F30
loudspeaker. Do not lift it while bending from the waist.
Each REVEL PERFORMA F30 loudspeaker is packed in its own
carton with a shipping weight of 102 pounds (46.3 kg). To avoid
personal injury and possible product damage, we strongly urge you
to enlist additional help before unpacking either carton.
To unpack a loudspeaker, perform the following steps:
1. Place a REVEL PERFORMA F30 loudspeaker onto its side.
2. Open the bottom flaps. Stand the unit in the up position.
3. Open the top flaps. Take out the spike foot kit and set it aside.
Remove the top pad.
4. Lift the carton off the loudspeaker and set it aside, being careful
not to damage the cabinet. Also, remove the middle pad.
5. Grasping the cabinet on the sides, lift it up and remove the bot-
tom pad. Use caution to avoid touching any of the transducers.
REVEL PERFORMA F30
Owner’s Manual
6
Install straps f or
single-wire operation
Install straps f or
single-wire operation
Lo w Frequenc y Input
High Frequenc y Input
Remo ve straps for bi-wire
or bi-amp
+1 -1 0 +.5 -.5
Fr ont Tweeter Le vel (dB)
Serial Number Re vel Nor thridg e, Calif ornia
Made in U .S.A.
Spike Foot Kit
Middle Pad
Top Pad
Bottom Pad
Warranty Card and
Owner’s Manual