tekmar 545 Thermostat Installation User Manual

Page 2

Advertising
background image

© 2008

D 545 - 07/08

2 of 40

Table of Contents

Table of Contents ............................................................2
Display and DIP Switches ..............................................2
Dip

Switches

...........................................................2

Access

Levels

.........................................................3

Display and Symbols Description............................3

User

Interface

.........................................................4

Setup ..............................................................................5
View

Menu

.............................................................5

Adjust

Menu

............................................................6

Time

Menu

............................................................ 13

Scene

Menu

.......................................................... 14

Schedule

Menu

..................................................... 16

Monitor

Menu

........................................................ 19

Test

Menu

............................................................ 21

Miscellaneous

Menu

............................................22

Testing .........................................................................23
Thermostat Operation .................................................. 24

Auxiliary Sensors ................................................. 24

Heat or Cool Mode of Operation ..........................25

Adjusting the Temperature ...................................25

Cycles Per Hour ...................................................26

Heating Terminal Units .........................................26

Heating

Operation

................................................27

Cooling

Operation

................................................29

Cool

Groups

.........................................................29

Fan

Operation

......................................................29

Filter Change ....................................................... 31

Time

Clock

........................................................... 31

Setting the Schedule ............................................. 31

Optimum Start / Stop ...........................................32

Scenes

.................................................................33

Away Hold ............................................................34

Radiant Base Load ..............................................34

Offset

...................................................................35

Warm Weather Shutdown ....................................35

Cold Weather Shutdown ......................................35

Units of Temperature ............................................35

Backlight

..............................................................35

tN4

Address

.........................................................35

Pump

Exercising

...................................................35

Error Messages ............................................................36

Cleaning the Thermostat ......................................39

Warranty .......................................................................40

Display and DIP Switches

Dip Switches

Y1 Rc G1 G1

R

C

tN4

S1

S2

Com

W1

Rh1

Rh2 W2

tN4 System Control (DIP Switch #2)

A tN4 System Control is a control, not a thermostat, that
the 545 thermostat connects to through the tN4 bus. All
tN4 compatible Outdoor Reset Modules are tN4 System
Controls.

• If the thermostat is connected to a tN4 System Control,

set the tN4 System Control DIP switch to tN4 System
Control (down position).

• If the thermostat is not connected to a tN4 System

Control, set the tN4 System Control DIP switch to None
(up position).

Lock / Unlock (DIP Switch #1)

Use the Lock / Unlock DIP switch to lock or unlock the
Access Level of the 545.

• To unlock the Access Level, set the DIP switch to the

unlocked (down) position.

• To lock the Access Level, set the DIP switch to the locked

(up) position. Once locked, a padlock is displayed in the
lower right corner of the display and the Access Level
cannot be changed.

Note: The tN4 System Control’s Lock / Unlock DIP switch
overrides the Lock / Unlock DIP switch on the 545. Set
the tN4 System Control’s Lock / Unlock DIP switch to the
Unlock position before Access Levels can be changed on
the thermostat.

Advertising