tekmar 545 Thermostat Installation - Manual (Page 4)

© 2008 D 545 - 07/08 4 of 40
User Interface
Continue
to next Item
Continue to next Menu
Continue
to next Item
Continue
to next Item
Use the User Interface available on the Liquid Crystal Display
(LCD) to setup and monitor the operation of the thermostat.
Use the four push buttons below the LCD (Menu, Item, Up,
Down) to select settings. As you enter settings, record the
settings in the Job Record J 545.
Menu
The menus display in the Menu Field at the left of the
LCD.
Eight menus are available:
Adjusting a Setting
To adjust a setting:
1. Use the Menu button to select the appropriate menu.
2. Use the Item button to select a menu item.
3. Use the Up or Down button to adjust the setting.
Default Item
• • To set the default item in the View Menu, display the
item for more than five seconds.
After navigating menus, the display reverts back to the
default item after 60 seconds of button inactivity.
Copy Settings
To save time in setting thermostats, you can copy the settings
from one tN4 thermostat to a second tN4 thermostat.
Refer to the COPY item in the Misc menu on page 22.
• • View
•
• Adjust
•
• Time
•
• Scene
• • Schedule
•
• Monitor
•
• Test
•
• Miscellaneous
To select a menu, press and release the Menu button.
Item
In each menu, a group of items can be selected. The
abbreviated name of the selected item displays in the Item
field of the LCD display.
•
• To view the next available item, press and release the
Item button.
• • To view the previous item, hold down the Item button
and press and release the Up button.