Tweco 211i Fabricator - Manual (Page 29)

INTRODUCTION FABRICATOR 211i
Manual 0-5157 2-5 INTRODUCTION
NOTE
The recommended time delay fuse or circuit breaker size for 115V is 30 amp. An individual branch circuit
capable of carrying 30 amperes and protected by fuses or circuit breaker is recommended for this applica-
tion. Fuse size is based on not more than 200 percent of the rated input amperage of the welding Power
Source (Based on Article 630, National Electrical Code)
Tweco continuously strives to produce the best product possible and therefore reserves the right to change,
improve or revise the specifications or design of this or any product without prior notice. Such updates or
changes do not entitle the buyer of equipment previously sold or shipped to the corresponding changes,
updates, improvements or replacement of such items .
The values specified in the table above are optimal values, your values may differ. Individual equipment
may differ from the above specifications due to in part, but not exclusively, to any one or more of the fol-
lowing; variations or changes in manufactured components, installation and conditions and local power
grid supply conditions.