Tweco 550i Transmig - Manual (Page 50)

TRANSMIG 350i, 450i, 550i
BASIC WELDING GUIDE 4-6 Manual 0-5205
Cigweld Welding Wire Selection Chart
Description Part Number
1.2mm Spool 15kg
Diameter Pack
Shield-Cor 11 Shield-Cor 11 is an all positional
self-shielded flux cored wire recommended
for the general purpose single or multi-pass
lap, fillet and butt welding of mild and
galvanised steels.
Application
720923
1.6mm Spool 15kg 720925
Note Handispool = 200mm diameter, Spool = 300mm diameter.
Autocraft LW1-6 General purpose solid welding wire
suitable for the all positional Gas Metal Arc
Welding (GWAW) of mild and low alloy
steels, used in general fabrication and
for welding of light to medium gauge
sheet and tubular steel sections. Note
that a suitable shielding gas is required.
720114 0.8mm Spool 15kg
0.8mm Handispool 5kg Autocraft 316LSi Solid
Stainless Steel Mig Wire
General purpose all positional stainless
steel wire providing excellent results when
used with correct shielding gas. Suitable
for the general welding of a wide range of
stainless steels (300 & 400 series). Note
that a suitable shielding gas is required.
720288
1.0mm Handispool 2kg
Autocraft AL5356 Solid
Aluminium Mig Wire
Excellent general purpose Aluminium Mig
wire suitable for the welding of a wide
range of wrought and cast Aluminium
alloys containing Magnesium. Note that
a suitable shielding gas is required.
723224
T
ransmig
350 i
MULTI PROCESS WELDING INVERTER
720090 0.9mm Spool 15kg
0.9mm Handispool 5kg 720161
722226 0.9mm Spool 7kg
0.9mm Handispool 5kg 720283
722227 1.2mm Spool 7kg
1.0mm Spool 7kg 722224
i
,
50
,
550 i
720094 1.0mm Spool 15kg
720095 1.6mm Spool 15kg
1.2mm Spool 15kg 720096
1.2mm Spool 15kg Verti-Cor 3XP 720919
1.6mm Spool 15kg 720921
Verti-Cor 3XP is an all positional rutile
type flux cored wire for welding a wide
range of mild and medium strength steels.
Verti-Cor 3XP is for use with
Argon+20 to 25% CO
2
or 100% CO type
shielding gases.
2
0.9mm Spool 15kg 721286
1.0mm Spool 15kg 722386
1.2mm Spool 15kg 721287
4